PP-WST105 - HAWK BASIC KIT

$699.00

Only Cord Tool You Will Need.


1 - Work in a well lit area and keep customers

away while working to reduce distractions

2 - Always wear appropriate PPE

3 - Only use the tool if properly trained

4 - Always be aware of where you are cutting to

avoid damage to the vehicle and to yourself

5 - Do not force the tool or drill. Move the tool

rather than apply excess force

6 - Keep tool clean and well maintained


Add to Cart

  • SPECIFICATIONS

    PP-WST105 - HAWK BASIC KIT:

    • HAWK

    • WIRE FEEDER

    • DRILL ADAPTOR

    • CUT OUT CORD

    • WINDING HANDLE


    Master Kit is for using wire.

    PP-WST105MASTER - HAWK MASTER TECH KIT:

    • HAWK

    • WIRE FEEDER

    • DRILL ADAPTOR

    • CUT OUT CORD

    • WINDING HANDLE

    • METALIC PULLIES FOR USE WITH STEEL WIRE

    • TOOLPOWERED SUCTION ADAPTOR

  • HOW TO USE

    1 - Attach cord to a bobbin and load the

    cord until the bobbin is full Thread the

    cord around the central spool and attach

    to the second bobbin and repeat loading

    procedure


    HOW TO ATTACH AND THREAD CORD TO THE TOOL ?


    2 - Multi position cord thread. Use this

    when working on glass which requires

    multiple different positions of the tool.

    Lay the cord around the body of the tool.

  • DETAILS

    1 - Initial Set Up 2 - Cut out up a pillar and around top corner


    3 - Cut out along the A pillar until

    you are past the top corner


    4 - Cut along bottom untill resistance is felt


    5 - Release the spool brakes

    and move tool


    6 - Cut along the roof and stop just after the

    corner. Now along the bottom and up the A

    pillar untill the glass is fully cut out

BESTSELLERS

Stay motivated

Sort & Filter