Equalizer Timesaver Blades
5 Item(s)
List Grid
-
TimeSaver Blades, 5"
Regular Price: $39.00
Special Price $31.50
Equalizer TimeSaver Blades These blades will cut urethane cleanly from inside the vehicle and are thinner than most blades on the market. All Equalizer TimeSaver Blades are made of hardened, stainless steel and can be easily resharpened dozens of times. Because of the leverage put on the bearings and the yoke bar, we do not recommend using these blades in a standard oscillating tool, only the Equalizer TimeSaver tool. Because these blades can cause regular oscillating tools to be damaged, we have color-coded them to match the tool. If the tool is not yellow then do not use the blades in the tool. Made in USA. TSB6603 5 TSB6605 5-1/2 TSB6606 6-1/2 TSB6608 8-1/2 Learn More -
TimeSaver Blades, 5-1/2"
Regular Price: $35.00
Special Price $29.50
Equalizer TimeSaver Blades These blades will cut urethane cleanly from inside the vehicle and are thinner than most blades on the market. All Equalizer TimeSaver Blades are made of hardened, stainless steel and can be easily resharpened dozens of times. Because of the leverage put on the bearings and the yoke bar, we do not recommend using these blades in a standard oscillating tool, only the Equalizer TimeSaver tool. Because these blades can cause regular oscillating tools to be damaged, we have color-coded them to match the tool. If the tool is not yellow then do not use the blades in the tool. Made in USA. TSB6603 5 TSB6605 5-1/2 TSB6606 6-1/2 TSB6608 8-1/2 Learn More -
Oscillating Blade, 3-3/4 x 2
Equalizer Talon Dual-Sharpened Oscillating Blades Sharpened on both sides Some manufacturers of oscillating tools recommend that their tools be used with a blade that is sharpened on both sides. They believe it is easier for the blade to cut through the center of the urethane if it does not rub against the glass. For these users, we offer these high-quality stainless steel blades. These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools on the market. Will not fit the Ninja line of tools. Made in the USA. 51844 3-3/4" Long 2 Cutting Part 51845 5" Long 2-1/4 Cutting Part 51846 5-1/2" Long 2-1/2 Cutting Part Learn More -
Oscillating Blade, 5 x 2-1/4
Equalizer Talon Dual-Sharpened Oscillating Blades Sharpened on both sides Some manufacturers of oscillating tools recommend that their tools be used with a blade that is sharpened on both sides. They believe it is easier for the blade to cut through the center of the urethane if it does not rub against the glass. For these users, we offer these high-quality stainless steel blades. These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools on the market. Will not fit the Ninja line of tools. Made in the USA. 51844 3-3/4" Long 2 Cutting Part 51845 5" Long 2-1/4 Cutting Part 51846 5-1/2" Long 2-1/2 Cutting Part Learn More -
Oscillating Blade, 5-1/2 x 2 1/2
Sharpened on both sides.Some manufacturers of oscillating tools recommend that their tools be used with a blade that is sharpened on both sides. They believe it is easier for the blade to cut through the center of the urethane if it does not rub against the glass. For these users, we offer these high-quality stainless steel blades. Made in the USA. Learn More
5 Item(s)
List Grid